Two independent charging channels for li-ion batteries. 18650, 14500, RCR123 (16340) and more battery types supported. Australian approved mains adapter and car charging adapter included. Selectable charge current of 500mA or 1A make this a fast charger. USB power bank feature..
XTAR WP2 II 14500/ 14650/ 17670/ 18500/ 18650/ 18700/ 10440/16340 3.7V Li-ion battery charger.
The Xtar WP2 II is a versatile device. It can charge your Li-ion batteries at home, or in the car, and can be used in remote areas with no power supply to charge your phone via USB.
Charging
- Operation Temperature: 0~40°C
- Input AC: 12V DC: 1000mA
- 500mA CC Current: 500m A±5%
- 1000 A CC Current: 1000m A±5%
- Cut-Off Voltage: 4.2±0.05V
- CV Cut-off Current:
- Standby Current:
- TC Current (Battery Volt 2.0~3.0V): 80±20m A
- Auto Recharging Threshold Value Voltage: 3.9±0.15V
Charging USB devices from your Li-ion batteries
- Operation Temperature: 0~40°C
- USB Interface Output Floating Voltage: 5.0V
- Output Floating Voltage Ripple:
- Reactive Current:
- Maximum Output Current: 500mA
- Battery Output Cut-off Voltage: 2.80±0.15V
Reviews
The charger is very close to a CC/CV charging profile. The charger does charge to a little below 4.2 volt, this might put slightly less energy in the battery, but will increase the lifetime of the battery a little. Because the charger does supply a small current at 0 volt, it can reset any kind of protection. The possibility to select two charge currents makes it much better for both 18650 and smaller cells, the 18650 can be charge faster and the smaller cells can be charged safer.
The usb power is a nice addition, but would have been even better if it always worked when 12 volt was connected to the charger.
All in all a good charger and a nice upgrade to the old WF2 charger. ----- HKJ
LINK to full review