JETBeam DDR30 3300 lumen LED torch

480g, 3300 Lumens, 48,000cd: With three American CREE XM-L2 LEDs and a digital display, the rugged DDR30 is the latest super torch from JETBeam. With three brightness modes and a display that shows the current mode and remaining power, this is an advanced and powerful torch. Upgraded XM-L2 version.

Batteries not included. Add discounted batteries and optional charger as a kit below, or choose from our accessories section. 12V charge lead is included.

Features

• 3 X CREE XM-L2 LEDs, 50000 hours life
• Advanced digital display system
• Displays output mode
• Displays remaining battery power
• Easy operation with side control switch
• Rechargeable
• Waterproof to IPX-8

Specifications

• Light source: 3 X Cree XM-L2 LED
• Beam distance: 450m
• Intensity: 48000cd
• Battery: 3*18650
• Output regulation: Side switch
• Circuit design: Constant current circuit, constant brightness.
• Working voltage: 9-19V
• Waterproof: IPX-8
• Body: Aerospace aluminium
• Dimension: 164 mm (L ) x 67mm (D), weight: 480 gram

Note: The above-mentioned parameters may vary between flashlights, batteries, and environments.

Output & Runtime

Operation

• ON/OFF: Press the side control switch for 2 seconds to turn it on.
• Mode selection: While the light is on, click to switch modes, double click to access strobe mode.
• Mode display: Displays the current mode. (“H” means High mode, “E” means Middle mode, “L” means low mode, “S” means strobe mode.)
• Power display: Displays the remaining power level.(“0~9” to display the remaining power level, 9 means full battery power, 0 means low power. There is flashing warning at low power.)
• Momentary on: Press the side control switch from OFF for less than two seconds to momentarily turn on the DDR30.